PBS Precision Heatseal Benchtop Press System
This convenient heat sealing system for plastics and sealable composites can be used for low volume convenience packaging or as a development laboratory tool. Composed of a rugged PBHS Benchtop Heatseal Press and a PHCM Heatseal Control Module the system offers both safety and precision control of Time, Temperature, and Pressure of the sealing cycle.
PHCM Precision Heatseal Control Module
This module provides control over both Sealing Time and Temperature. The versatile RES-242 Controller offers various sequence possibilities. Standard temperature range is 0 - 300°C. with 0 - 500°C. as optional. Timing can be preset to within 0.1 Seconds. Cooling can be controlled by either Temperature or Time. Actual Temperature is displayed on the face-mounted meter and is repeatable to within 3°C. Auxiliary ports are provided for both Data Output and foot switch actuation.
PBHP Precision Benchtop Heatseal Platen Press
This Press can be fitted with virtually any heatseal configuration that may be required. Two Pressure Regulators are provided for a safety close at low pressure followed by high sealing pressure when the platen is essentially closed. Temperature and cycle time are controlled by the PHCM Module.
BENEFITS:
- Precise and repeatable control
- Ease of Operation
- Adaptable to a wide variety of uses
- Datalogger recorder for accurate records
SPECIFICATIONS
PHCM MODULE
Power: up to 4.4KVA @ 115/230 VAC
Transformer Sec. : as required
Timer: 0- 9.9 or 0- 99
Temp. Range: 0 - 300°C. or 0 - 500°C
Size: 8-1/2" x 17-1/2" x 7" h.
PBHP PLATEN PRESS
Platen Size: 6" x 8"
Stroke: 4" Force: 490# @ 100 psig
Size: 8-1/2" x 12" x 21" h.
Packworld USA, 539 South Main Street, Nazareth, PA 18064-2700. Tel: 610-746-2765; Fax: 610-746-2754.