ELECTRO PAC VACUUM/GAS BAG SEALER
Source: Packaging Aids Corporation
Designed for the most critical electronic packaging needs with all seal parameters controlled for a perfect seal - every seal
Designed for the most critical electronic packaging needs with all seal parameters controlled for a perfect seal - every seal!
- BIACTIVE SEAL JAW:
12" to 30" seal length in 6" increments
5/16" seal width - SEAL INTEGRITY:
Suretemp temperature controller
Independent seal, cool and vacuum timers
electrostatic and environmental protection - FLEXIBILITY:
Seals a wide variety of bag materials including barrier, foil, laminates, PE, and PP - VACUUM/GAS:
Venturi vacuum system
Vacuum level switch for controlled pouch vacuum level
MAP gas flush cycle - PORTED EXHAUST:
Combines all exhaust gas air into one port for venting outside clean room - SAFETY, LIMITED OPERATOR ACCESS:
Clear lockable controll box cover
Automatic jaw interference release system
Emergency stop button - CONVENIENCE:
Bag stretcher
Workshelf and bag support - OPTIONS:
Multistage vacuum/gas
High speed vacuum system
Printer or embosser
Packaging Aids Corporation, 24 Tiburon Street, P.O. Box 9144, San Rafael, CA 94912-9144. Tel: 415-454-4868; Fax: 415-454-6853.