Drop Packer with SOF-PAC Attachment
Source: Climax Packaging Machinery Inc.
The SOF-PAC packer is designed to softly place containers onto the bottom of the case or tray
The SOF-PAC packer is designed to softly place containers onto the bottom of the case or tray. This is particularly effective for some applications that can not be drop packed, such as plastic or glass containers with very thin walls, hazardous material, or any other delicate products. If the containers are non-round, a lane divider is always needed. Very often, lightweight or delicate, round bottles will also need the direct control of a lane divider.Glass, plastic, metal, or composite containers
Round or non-round
Case infeed can be inline, right-angle, or counterflow design
PLC controls
Wide variety of pickup devices
Speeds up to 15 CPM with single case pack (25 CPM with double)
Built-in lane divider is available
Client modifications upon request
Specifications
Shipping Weight
Approx. 4,200 lbs.
Case/Tray Size Range (NOMINAL)
Minimum - 8"L x 8"W x 2"H
Maximum - 22"L x 15"W x 18"H
Pneumatics
Minimum air supply required - 60 PSI
Air Consumption - 0.5 CFM/Cycle
Drives
Container Conveyor - 1 1/2 HP Vari-Speed
Case/Tray Conveyor - 1 HP Fixed Speed
Standard Electricals
Motors - 230 or 460/60/3
Controls - 115/60/1
Total Amps - 12 Amp
(other electrical packages can be supplied upon request)
Climax Packaging Machinery Inc., 25 Standen Drive, Cincinnati, OH 45015. Tel: 513-874-1233; Fax: 513-874-3375.