DIN Rail Mount Timer

The B90D DIN rail timer is an ultra-slim timing device designed to improve performance and simplify wiring while conserving interior panel space. The timer measures 22.5 mm wide x 93 mm high x 100 mm deep, and provides setup and troubleshooting via its LCD display.

The unit's field selectable functions and multiple timing modes allow settings from 0.2 seconds to 999 hours, enabling users to standardize on one timing device for all behind-the-panel timing needs. Field selectable functions include standard On-Delay, Off Delay, Interval, One Shot Operation, and a variety of repeat cycle modes, as well as eight timing modes. Digital setting enables ±0.5% accuracy.

The timer offers a wide range of DC start signal, making it compatible for use with most sourcing proximity and photelectric sensors. AC input capability enables the unit to replace many plug-in TDRs and older electromechanical timers.

The UL recognized, CE compliant timer has optically isolated inputs that are programmable for level or edge trigger operation. The 8-amp SPDT relay output can be used for direct load switching.

Danaher Controls, 1675 Delany Rd., Gurnee, IL 60031. Tel: 847-662-2666; Fax: 847-662-6633.