Product/Service

Automatic Screen Printing Model RP6-UV

Source: Dependable Machine Co., Inc.
For automatic screen decorating of cylindrical bottles, jars, and cans, in plastic, glass, or metal up to 6" in diameter
• MODEL RP6-UV - With Ultraviolet Drying (as shown)
• MODEL RP6-SU - With Standup Transfer to Conveyor Dryers

For automatic screen decorating of cylindrical bottles, jars, and cans, in plastic, glass, or metal up to 6" in diameter.

The RP6 is a mechanically driven machine. All functions are controlled and adjusted through a programmable electric sequencer, driven by the main drive. The control panel is located in the front of the machine for easy access. The operator/ setup control panel contains switches for run or jog cycles, automatic register, flame treating, and emergency stop.

IN OPERATION...

The transfer baskets traverse left to right and right to left. They are raised and lowered by a mechanical cam. With the transport holders in the right hand position, a container is presented to the flame station, the pre-register station, the print position and the U.V. or take off position. After containers are secured in these positions, by the positioning cylinders, the holders drop and move under the containers, to the left position. During the movement time to left, the secured containers are being treated, pre-registered, printed, U.V. cured and/or transferred.

With the carriage in the left hand position, the baskets raise up to accept a new container, a treated container, pre-registered container, and a printed container. After the positioning cylinders release the containers to the holders, the carriage moves to the right, the containers are advanced, and the sequence starts again.

STANDARD FEATURES INCLUDE:

    • All Mechanical Movements
    • Reciprocal Flood Bar Squeegee Action
    • Automatic Loading and Unloading
    • Can be Used with Existing Flat Bed Dryers
    • Vari-Speed Control
    • Easy Set Up and Changeover
    • Programmable Electronic Functions

STANDARD OPTIONS INCLUDE:

    • Automatic Flame Treating
    •Automatic Pre & Final Register
    • Conventional or U.V. Drying
    •No Bottle No Print
    • Electronic Air Cleaning

MACHINE SPECIFICATIONS:

Print Area: 10" x 18"
Screen Stroke: 19"
Speed: 1,200 to 2,100 per hour
Maximum Part Diameter: 6"
Power: Standard 220v 3 Phase 15 Amp
Air Requirements: 75 psi
Size:4' Deep x 6' High x 10' Long
Weight: 1,800 Lbs. Crated

For additional information on screen printing, pad printing, flame treating, hot stamping, and U. V. curing equipment please call us to discuss your requirements.

Dependable Machine Co., Inc., 74 Sand Park Rd, Cedar Grove, NJ 07009-1267. Tel: 973-239-7800; Fax: 973-239-7855.