Roll Handing Equipment With Fully Motorised Vertical Spindle Lifting Attachment

(PRWEB) New to Packline Materials Handling is the roll handling equipment with fully motorised vertical spindle lifting attachment with automatic ejection; for lifting rolls of foil or film. Constructed from stainless steel, this roll lifting and handling solution is suitable for clean room environments, such as food processing and pharmaceutical industries.

This vertical spindle attachment was designed for a customer requirement to lift and rotate rolls, as well as eject the rolls from the lifting attachment, using fully motorised functions. No manual handling is necessary with this lifting solution.

Using a combination of three motors, the attachment is able to grip the core of the rolls, rotate the rolls and also eject from the lifting attachment with the use of a remote control and push buttons mounted onto the lifter.

The ejection system is suitable for unloading rolls onto a machine mandrel, along a processing line, which is positioned at height and difficult to reach by hand.

The motorised functions are fitted with a torque unit meaning there is a reduced chance of damaging the roll by over-tightening, and also decreases the possibility of damaging the attachment by operating the motor for too long.

Specifications: 
Safe Working Load: 70kg (154lbs) 
Reel Core Size: 76mm (2.99”) 
Load Centre (from the column): 813mm (32”) 
Max. Reel Length: 800mm (31.5”) 
Min. Reel Length: 190mm (7.48”) 
Max. Reel Diameter (at 800mm length): 460mm (18.11”) 
Max. Reel Diameter (at 190mm length): 990mm (38.98”)

Ideally suited for clean room environments, the stainless steel range of roll handling equipment from Packline Materials Handling, is suitable for use in the following industries: 

•     Food processing
•     Drinks and Beverages Processing
•     Dairy
•     Pharmaceutical
•     Packaging and Labelling Industries
•     FMCG; Fast Moving Consumer Goods
•     Medical Processing
•     Chemical

The purpose-designed compact framework, positioning of handlebars and addition of an optional remote control device provide improved manoeuvrability and ease of use for the operator.

The incredibly small footprint of this lifter makes the roll handling equipment highly manoeuvrable and a natural choice for today’s narrow production lines and demanding lifting requirements.

For further information on roll handing equipment with fully motorised vertical spindle with ejection, or the full range of lifting and handling equipment, please contact Packline Materials Handling on +44 (0)1202 307700 or visithttp://www.packline.co.uk