Packline Materials Handling Announce New Roll Handling Equipment With Extended Vertical Spindle Attachment For Handling Longer Rolls

New to Packline Materials Handling is the roll lifting equipment with extended vertical spindle attachments, available in widths of 3” or 6” for handling longer rolls of film or foil. Constructed from stainless steel, this lifting solution is designed for food, drinks and pharmaceutical industries.

(PRWEB) New to Packline Materials Handling is the roll lifting equipment with extended vertical spindle attachments, available in widths of 3” or 6” for handling longer rolls of film or foil. Constructed from stainless steel, this lifting solution is designed for food, drinks and pharmaceutical industries.

The extended 3” or 6” spindle attachments allow much longer rolls to be lifted.

The rollers on the attachment mean that the transition from the spindle attachment to the processing line mandrel is much easier and smoother.

The additional length of the attachment ensures that the load centre of the roll is still on the length of the spindle.

Geared rotation allows the operator to re-orientate the roll just by turning the hand-wheel.

This lifting solution enabled the operator to pick up large rolls, rotate them, and then raise them above head height in order to load the rolls onto a processing line.

Most roll sizes can be catered for and therefore each application is designed and manufactured individually to ensure the required spindle attachment is supplied.

Specifications - 3” spindle: 
Maximum capacity: 250kg / 551.16lbs (with appropriate leg length). 
Load centre: 722mm / 28.43 inches from front of column. 
Attachment mass: 43kg / 94.80lbs. 
Main materials: stainless steel 304, aluminium 6082/T6, Delrin Polypropylene, brass, phosphor bronze.

Specifications - 6” spindle: 
Maximum capacity: 175kg / 385.81lbs (with appropriate leg length). 
Load centre: 783mm / 30.83 inches from front of column. 
Attachment mass: 43.5kg / 95.9lbs. 
Main materials: stainless steel 304, aluminium 6082/T6, Delrin Polypropylene, brass, phosphor bronze.

Ideally suited for clean room environments, the stainless steel range of roll handling equipment is suitable for use in the following industries: 

•     Food
•     Drinks and Beverages
•     Dairy
•     Pharmaceutical
•     Medical
•     Chemical
•     FMCG (Fast Moving Consumer Goods)

The purpose-designed compact framework, positioning of handlebars and addition of an optional remote control device provide improved manoeuvrability and ease of use for the operator.

The small footprint makes this roll handling equipment highly manoeuvrable and a natural choice for today’s narrow production lines and demanding lifting requirements.

Packline Materials Handling is able to provide bespoke roll lifting and handling solutions by creating new concepts or tailoring existing handling equipment to meet specific requirements.

For further information on the roll handling equipment with extended vertical spindle attachment for handling longer rolls, or the full range of lifting and handling equipment, please contact Packline Materials Handling, or contact Ultrasource LLC in the USA for more information on the ‘EZ Lift’.